UPVC Hardware & Accessories
Winkhaus Multipoint 2 hooks and 2 rollers Lift lever (L/L) or Split spindle (S/S)
This Winkhaus Multipoint is a 1 piece locking mechanism consisting of a latch, deadbolt, 2 hooks and 2 rollers£108.22Winkhaus Multipoint Latch Deadbolt 2 Rollers 2 Mushrooms Split Spindle
This Winkhaus multipoint lock has a latch and deadbolt with 2 rollers and 2 mushrooms and is lever lever with a split spindle and has a flat 16mm faceplate.
£97.93Winkhaus Scorpian Multipoint 3 hooks and 2 rollers Standard length
This Winkhaus Scorpian Multipoint is a 1 piece locking mechanism consisting of a latch, 3 hooks and 2 rollers.Split spindle version 2398251 replaces 2398489£85.68Winkhaus Gearbox - Split Spindle Lever Lever
This Winkhaus genuine gearbox - Split Spindle or Lever Lever. Winkhaus cases are held on to strips by pins. To remove the pins, tap them out with a punch (The centre pin must be accessed by undoing the screw on the case). Reattach by reusing the original pins.
Operation: Split spindle
Latch reversal: Push in latch and a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw.
Nightlatch reversal: The small rectangular slot adjacent to side of the spindle hole contains a black roll pin. Insert a flat bladed screwdriver and roll the pin to opposite side to reverse function.
Price From: £43.14Winkhaus Cobra Latch, Deadbolt, 2 Hooks, Option 3
This 2 hook cobra has smaller distances between the hooks, measuring 1340mm compared with 1490mm for a normal Cobra.
Operation: Lift lever or split spindle nightlatch.
Latch reversal: Push in latch a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw.
£117.81Winkhaus AV2 + Autolocking - Latch, Deadbolt and 2 Hooks Flat 16mm Faceplate, Lock only - Motor Available Separately
Hooks on this lock are automatically engaged as the door is closed without needing to lift the handle. The handle will retract the hooks from the inside and a further turn of the key deadlocks the door. To transform this multipoint lock into an electronic locking solution, simply attach the 12V DC Winkhaus AV2 motor (available separately) and connect using the Winkhaus AV2 cable to the wide range of Winkhaus access control products available. Operation: Lever/Lever. Latch reversal: Push in
latch and undo screw inback of lock case to remove latch, reverse and reinstate.Price From: £128.08Winkhaus Gearbox - Lift Lever
This Winkhaus genuine gearbox is the lift lever version features an 8mm single spindle and 92mm centres. Winkhaus cases are held on to strips by pins. To remove the pins, tap them out with a punch (The centre pin must be accessed by undoing the screw on the case). Reattach by reusing the original pins.
Operation: Lift lever
Latch reversal: Push in latch and a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw.
Winkhaus STV Thunderbolt Split Spindle Multipoint Lock
The Winkhaus ThunderBolt 5 has been especially designed with increased tolerances for door installers. The latch is made of Steel and is suitable for FD30 Fire Doors. This locking system incorporates twin deadbolts in the upper and lower positions, providing high security levels that easily passes the rigours of PAS23/24 and EN14351-1 2006 security standards.
Operation: Lift lever or split spindle nightlatch.
Latch reversal: Push in latch a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw.
£104.79Winkhaus Cobra Latch, Deadbolt, 2 Hooks, Key Wind
These key wind locks are not handed and can be reversed on site. The locks listed on this page have 20mm faceplate. Please see the previous page for 16mm faceplate versions.
Operation: Key wind.
Latch reversal: Push in latch a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw.
£106.16Winkhaus Overnight Lock - 16mm Faceplate, Split Spindle.
This Winkhaus overnight lock is available with either a 35mm or 45mm backset. Euro cylinder lock case used to secure a property for a limited period while a replacement lock is located. This lock has a split spindle but a solid spindle can be used.
Specification
- Faceplate: 16mm.
- Centres: 92mm.
- Spindle: Split 8mm.
- Operation: Split spindle.
£51.36