UPVC Door Locks
Mila Copy Gearbox Latch Only Version - Lift Lever
This Mila gearbox has a latch only and available with 25mm, 28mm, 35mm and 45mm backsets and has 92mm centres and an 8mm single spindle.
Operation: Lift
lever Latch reversal: Undo the screw in the side of the lock case to remove the latch, reverse, reinsert and replace the screw. M4 x 10mm
self tapping machine screws need to be used with this lock as screw holes are unthreaded. Mila centre case with no deadbolt,self tapping screws are required (not supplied)£39.40
KFV Latch, Deadbolt, 4 Rollers, Key Wind
Complete with 4 rollers and key wind operation. Also available with lift lever operation on previous page.
Operation: Key wind.
Latch reversal:Depending on date of manufacture either (1) Push down serrated button at the top of the lock case and at same time pull out latch, reverse and reinsert.(2) Push in the latch and undo the screw in the back of the lock case, remove the latch, reverse and reinsert. Or (3) Push in the latch and undo the screw in the side of the lock case to remove the latch, reverse and reinsert.
Price From: £140.94
Mila Latch, 2 Rollers, 2 Hooks
This lock was originally made for Barratt homes and some versions may be stamped with the Barratt logo. Often found on balcony doors.Operation: Lift lever.
Latch reversal: Undo the screw in the side of the lock case to remove the latch, reverse, reinsert and replace the screw.
£69.11
Fuhr 856 Type 3, Latch, Deadbolt, 2 Rollers, 2 Hooks
This lock features lift lever operation. Look out for the 859 SS series which has split spindle nightlatch operation. This Type 3 lock features 2 rollers and 2 hooks.
Operation: Lift lever.
Latch reversal: Undo the screw in the side of the lock case adjacent to the latch. Remove the latch, reverse, reinsert and replace the screw.
Price From: £112.72
Fuhr 856 Type 1, Latch, Deadbolt, 4 Rollers
The 856 series features lift lever operation. It differs from the 859 series which has split spindle nightlatch operation.
Operation: Lift lever.
Latch reversal: Undo the screw in the side of the lock case adjacent to the latch. Remove the latch, reverse, reinsert and repace the screw.
Price From: £48.62
KFV Latch, Deadbolt, 4 Rollers
Complete with 4 rollers and lift lever operation. Also available with key wind operation on page 119.
Operation: Lift lever.
Latch reversal:Depending on date of manufacture either...(1) Push down serrated button at the top of the lock case and at same time pull out latch, reverse and reinsert. (2) Push in the latch and undo the screw in the back of the lock case, remove the latch, reverse and reinsert. or (3) Push in the latch and undo the screw in the side of the lock case to remove the latch, reverse and reinsert..
Price From: £88.67
Fuhr Centre Section Latch, Deadbolt, 2 Rollers
A centre lock section which has the ability to accept roller attachments and shootbolts. Both are supplied separately and roller extensions are available in pairs as either 200mm or 400mm between rollers.Operation: Lift lever.
Latch reversal: Undo the screw in the side of the lock case adjacent to the latch. Remove the latch, reverse, reinsert and repace the screw.
Price From: £72.06
Fuhr 856 Type 8, Latch, Deadbolt, 2 Rollers, 2 Pins
This is the lift lever version of the 856 2 roller, 2 pin deadbolt multipoint lock. See the FU855T835 and FU855T845 for The key wind version.
Operation: Lift lever.
Latch reversal: Undo the screw in the side of the lock case adjacent to the latch. Remove the latch, reverse, reinsert and replace the screw.
£132.44
CATEGORIESOpen
- Door Locks
- Door Handles & Ironmongery
- UPVC Door Locks
- UPVC Hardware & Accessories
- Window Locks
- Door Closers & Panic Hardware
- Padlocks & Chains
- Access Control & Digital Locks
- Safes & Key Cabinets
- Garage, Vehicle & Garden Security
- Key Blanks
- Tools & Consumables
FILTER BY:
- Price
- Manufacturer
- Faceplate
-
- Flat 16mm - Square Ends (7)
- U-Rail 24mm (1)
- Operation
-
- Key Wind (1)
- Lift Lever (5)
- Rollers
- Hooks
- Deadbolts
-
- 1 (6)
